The Classic "pinched" rail, rolled bottom, Hippie 1966 classic designed by Ray Woosley! Arguably the best 9'6" mal you'll ever ride!! (designed in '66 to usher in the new decimal currency, it has three special features "3" and originally cost $99 ... "99" hence the name COMPETITOR 399!!) Half inch cedar stringer, 9' 6” glassed in double layer 10oz boat volan on the deck and 10oz on the bottom.
This board is dedicated to Midget Farrelly and inspired by some of the features of Midget's first V Bottom boards from early 1967 to '68. The V is softer and the "pod" in the tail is pure Farrelly refinement !! The rails are pinched and 50/50 and the thickness is centred to aide in paddling, wave catching and speed. A VERY FAST BOARD!!! Special '68 Flex Fin!! Dimensions – 8'9” by 23” by 3” with 6oz plus 6oz kneeling patch plus 6oz tail patch on the deck with 6oz plus 6oz tail patch on the bottom. We also re-created a 9' version.
Directly from 1968 in every detail. Wide hip, rounded Pin. V from the tail gradually transitioning to a soft roll to the nose. The tail is slightly kicked which gives this board an amazing ability to turn and cut back! The name is dedicated to Rod Teys who designed and shaped the originals!! This board is fast and manoeuvrable and can nose ride with the best of them. Special '68 Flex Fin!!
This is an exact replica from 1968/69 with the wide point forward of centre, pinched rails, drawn out tail and flex fin way forward for drive and speed. Rails are pulled down from the deck and up from a subtle rolled bottom. 7' 10” to 8' in length, 22 1/2” wide and 3” thick under the chest for great wave catching and paddle speed. It's a ripper!
Designed to capture the "spirit" of the 1968/9 Tracker, it has a hull design slightly rounded bottom, fine pinched rails and a very soft V in the rounded pin tail. The plan shape has the wide point forward of centre and the "Flex Fin" is located further forward for drive and smooth bottom turns! A board with lots of soul!!! Special PLASMO Flex Fin!! 8.0" X 22 3/4 X 3" up to 8'6" X 23" X 3"
This is a "Mid Length Pin Tail" and is designed to handle small to large surf! It has V in the tail, smooth "egg rails" and thickness for paddle power and control! It is a single fin set up, with channels, plus two side bites. It also has a slight concave under the nose. A board with lots of drive and speed!! 8' X 22" X 3"
A very high performance board, yet can be ridden in small beach breaks equally as well! Slight kick in the nose and the tail for "late take-off's". The rail chine in the forward nose area, provides control. The concave in the nose, flows into a double concave V in the tail! Four fin set up provides fast fluid surfing and rapid response in the turns! This is an ultra modern board, and yet has that "Classic Look"!! 6oz plus 4oz on the deck, and 6oz on the bottom. 7'6" X 21 1/2" X 2 ¾" or 8' X 22" X 3"
